-
JF5-6
JF5 series section of round copper wire is 0.75~25mm and sued for the connection, its performance conforms to the standard of GB/T14048, 1-2006. The General principles of low voltage switchgear and control equipment, JB/T9659.1-2006, the terminal block of low-voltage switchgear and control equipment, and IEC60947-7-1:2006.
Advantage
PC marterial has good fire resistance, it passed the 960℃ hot wire test,, and within the scope of 120℃, work very reliably.
-
SND-15W
The SN series barrier terminal block comply with the international standard IEC60947-7-1/, EN60947-7-1.
Advantage
The terminal can be installed on the TH35 or G32 type guide rail, and also be on the plate.
Adopts plate connection.
Has an insulating part, such as clapboard, grouping separator and septa.
Has a safe dust cover
-
STV-2.5JD
The STV terminal blocks adopt a side-insertion wiring method. In addition to the advantage of tool-free wiring with the PUSH-IN terminal blocks, this model also features a side-entry design, which enables quick and secure wiring without bending radius.
Advantage
Easy connection by using central bridges and jumpers.
Can be mounted on TH35 DIN rails.
Quick marking by using marker strip ZB
-
SEK-6SN
The SEK Test disconnect terminal blocks comply with the international standard IEC60947-7-1. Screw connection. cross section: 6mm2. Color: Beige
Advantage
Easy and clear testing in current transformer secondary circuits can be performed using the test disconnect terminal blocks
Easy connection by using central bridges and jumpers.
Can be mounted on TH35 and G32 DIN rails.
Quick marking by using marker strip ZB
-
STV-2.5
The STV terminal blocks adopt a side-insertion wiring method. In addition to the advantage of tool-free wiring with the PUSH-IN terminal blocks, this model also features a side-entry design, which enables quick and secure wiring without bending radius.
Advantage
Easy connection by using central bridges and jumpers.
Can be mounted on TH35 DIN rails.
Quick marking by using marker strip ZB
-
SUK-2.5 2-2D
The diode terminal blocks comply with the international standard IEC60947-7-1. Screw connection. cross section: 2.5-6mm2. Color: grey
Advantage
Easy connection by using central bridges and jumpers.
Can be mounted on TH35 and G32 DIN rails.
Quick marking by using marker strip ZB
-
SUK Feed-Through Screw Terminal Block
The SUK feed-through terminal blocks comply with the international standard IEC60947-7-1. The connection range is 0.22-35mm2.
Advantage
1. Tighten with screws
2. Can be installed on TH35 and G32 DIN rails
3. Accessories of SUK series are complete
4. Can be Short circuit by central bridge UFB1 and side jumper UEB
5. Quick marking by using marker strip ZB
6. Colors can be customized
-
SN-75W
The SN series barrier terminal block comply with the international standard IEC60947-7-1/, EN60947-7-1.
Advantage
The terminal can be installed on the TH35 or G32 type guide rail, and also be on the plate.
Adopts plate connection.
Has an insulating part, such as clapboard, grouping separator and septa.
Has a safe dust cover
-
ST3 Feed Through Spring Terminal Block
The ST3 Feed-through terminal blocks comply with the international standard IEC60947-7-1.
Feed-through terminal block, cross section: 1.5-16mm2. connection method: Spring-cage connection, mounting type: NS 35/7,5, NS 35/15, color: grey
Advantage
Widely used in railway system
The compact design and front connection enable user-friendly wiring in a small amount of space
The large wiring space enables the use of conductors with ferrules and plastic collars within the nominal cross section
-
STS2-240
The STS2 multipurpose terminal blocks comply with the international standard IEC60947-7-1. Use screws with hexagonal socket. cross section: 2.5-300 mm2. Color: White
Advantage
The ribbing of clamping part lower contact resistance of the contact surface
Can be mounted on TH35 DIN rails.
-
STS2-300
The STS2 multipurpose terminal blocks comply with the international standard IEC60947-7-1. Use screws with hexagonal socket. cross section: 2.5-300 mm2. Color: White
Advantage
The ribbing of clamping part lower contact resistance of the contact surface
Can be mounted on TH35 DIN rails.
-
STS2-185
The STS2 multipurpose terminal blocks comply with the international standard IEC60947-7-1. Use screws with hexagonal socket. cross section: 2.5-300 mm2. Color: White
Advantage
The ribbing of clamping part lower contact resistance of the contact surface
Can be mounted on TH35 DIN rails.